You want the best quality when buying lawn mower blades. This will increase the longevity of the blade, and make your mower operate more efficiently.
Stainless steel is the best material for blades since it is strong and durable. They also don’t rust easily and give off an appealing look to your lawn.
Straight Blades
The blades that are included with your standard lawnmower are likely to be straight. These blades are good to bag and side discharge but they aren’t great for mulching since they’re not designed to lift much. If you want to use one that does both, consider buying the high-lift blade. They feature a curved edge on the back which helps to lift the clippings. They work best with tall or thick grass.
The blade’s side facing upwards has small raised ridges or wings which create an air-vacuum to raise the grass to make a precise cut. This kind of blade is suitable for dry and damp surfaces. However, it is better at cutting through thicker grass than regular lawn mower blades.
High-Lift Blades
High-lift blades can be distinguished through the curve that is upward on each end. They create strong airflow, which pushes clippings to the side bag or chute. They also provide a more precise cut for your yard, and you can often cut through thick grass.
This is because the blades generate more suction and airflow. If you have sandy soil, the dirt that they generate will quickly ruin your lawnmowers and cause premature wear.
As opposed to other mower blades for replacement it is not necessary to remove the deck of your mower to replace the blades. You can access the bolts holding the old blade by lifting the deck of your mower. When replacing the mower’s blade, make sure you are cautious when working with the sharp edge. Replace the blade after removing the previous one. Test it for fit. After that, you’ll be ready for your work.
Multi-Purpose Blades
The blades are a one-stop solution for your lawn mower, allowing you to mulch, bag or even side release easy grass mower blade sharpener clippings. They produce lots of suction and airflow, and also help to cut the grass into small particles that can easily be scattered over the soil to provide nutrients.
This type of blade is not suitable for cutting grass that is covered in sand. The reason is that the airflow can pull sand, dust and other particles in the blade. This could lead to the blade deteriorating faster.
The most effective way to locate the right lawn mower blades to fit your lawn mower is to examine the original blades that came with your pusher or lawn tractor. It is important to look for particulars like the blades’ length, as well as the size center hole. Then, compare them with the specifications of the blades that you would like to buy. This way, you will be able to be sure that the new blades will be compatible with your mower and function correctly. Be aware of the blade’s size. Blades that are thicker tend to be linked to longer lasting but this will depend on how often you use your mower and how thick the material is.
Mulching Blades
A mower blade that has an impressive upward curve at the back is perfect for lawns in which the grass clippings have to be mowed. These blades offer greater lift, which pushes the grass toward the deck, and then through the discharge chute. They also aid in improving the cut of thicker grasses. They may also require more engine power, which could cost you extra fuel.
The rear of a high lift blade is adorned with broader “wind wings” to increase the flow of air over the clippings which reduces suction and the amount dust released. They’re perfect for lawn mowers that ride and give a smoother, more uniform cut.
To install a mulching blade, you must first make sure that it fits the specifications of your mower. Place a block of wood between the blade mounting bracket and the blade to prevent it from benting as you tighten the bolt. Once you have the ratchet provided in the kit and washers, you can secure the blade.