Lawn mower blades wear down and require replacement regularly to ensure that your lawn looks the best. It is easy to replace the blades. You only need a few basic tools and a few simple steps.
The top lawn mower blades will have solid construction materials that will make sure they last for a long time without getting rusty easily. The blades should be able to take on extreme forces.
Deck Blade
The cutting blade is the most important element of a lawn mower. It is enclosed in a casing called a deck and is available in various shapes, sizes and types. Each comes with its own specs and has to be able to handle high-speed contacts with grass, as well as other things.
Standard blades are curvaceous and lift the grass in a scissor like action. The curved blade assists by dispersing clippings. This blade isn’t as strong than one with a higher lift and is suitable for use on sandy or dusty terrain.
Cylinder blades, also known as reel blades, consist of spiral blades that are welded into the form of a circular reel that rotates. They are used on reels or gas-powered mowers. They’re the most popular type of mower blade, and are also simple to replace. Many hardware or smokin’ hot lawn mower blades sharpeners-care stores will make the blades more balanced and sharper for a small cost.
Standard Blade
The most popular type of blade for lawn mowers is the blade that’s flat. It’s designed to cut grass, but does not have any special features like mulching or bagging. It’s suction is minimal and works on any grass.
Blades for high-lift mowers are angled to maximize airflow. This creates vertical suction that pulls the grass up to the mower deck. It gives a crisp appearance to your lawn. These blades are also ideal for mowing in sandy terrains.
If you opt to use these types of mower blades ensure that the shear pin holes are properly aligned with the center bolt hole in the mower. The blade may not sit correctly on the boss if not aligned correctly. The blade could wear out faster than you anticipate. It is suggested that you verify the shear pin’s locations with your mower’s operator manual or the list of parts to ensure the proper fit.
Lifting Blade
These blades re-circulate air to reduce the amount of clogging in the deck, yet still giving the highest quality cut. The blades are curved upwards creating a vacuum which increases the grass’s height and discharges it into the bagging system or side discharge.
The lifting power of these blades also increases the quality of cuts when they are used on grass that is longer which is where a less lift blade could struggle to create an evenly cut. They are also ideal for those who like to mulch lawn clippings and are compatible with an a 3-in-1 or 2-in-1 mower blade.
They are only a downside if you have a lawn mower with strong engines. These blades aren’t suitable for surfaces that are dusty or sandy where sand, grit and other particles can make the deck deteriorate faster.
Mulching Blade
A favorite choice for those who don’t use a bagger this blade allows clippings to be discharged, mulched, or ejected through the chute that discharges your mower. They have bigger “wind wings” that are larger than those on lawn mowers that are regular. They can generate more efficient airflow underneath the grass clippings. They can then be safe to be discharged by your mower.
Check the angle of the mulching blade on your lawn mower to make sure that it’s installed correctly. The bevel is the slope that is responsible for cutting at the edge of the blade. It should face down when you are mowing. The blade’s sharp edges may cause damage to your mower’s deck if it’s not properly installed. Be sure that the blade is not bent in an unnatural angle. It could be unusable for cutting larger grass. This is typically a sign of a broken blade.